contoh resume/cv

Posted: December 10, 2010 in Useful
  • Position : Electrical and Instrument SupervisorName : XXXXXXXX

    I/C No : XXXXXX-11-XXXX (Malaysian)

    Address for Correspondence : 29, Jln Merbuk,
    Taman Bulan Purnama, 24000, Terengganu.

    Contact House : +609 – xxxxxxxx
    Contact H/P : +601x-xxxxxxxx
    E-mail address : xxx@gmail.com

    Educational Qualification : Diploma in Electrical Engineering (Electronic and Communication)

    COURSE ATTENDED

    1. Chargeman AO Examination Course
    April 2001 – Institute of Industrial

    2. Programmable Logic Controller (PLC) Course
    June 2001 – Institute of industrial

    3. Off-Shore Safety Orientation (OTS/01)
    Esso / Overseas Technical Services (M) Sdn. Bhd.

    4. Basic Personal Survival at Sea (OTS / 03)
    Esso / Overseas Technical Services (M) Sdn. Bhd.

    5. Industrial First Aid with CPR (OTS / 01)
    Esso / Overseas Technical Services (M) Sdn. Bhd.

    6. Helicopter Underwater Escape Training (HUET) Course
    Terengganu Safety Training Centre (TSTC) Kemaman, Terengganu.

    7. Hydrogen Sulphide (H2S) Competence Course – MSTS Asia Sdn Bhd.

    PROFESSIONAL EXPERIENCE BRIEFS

    Total: 10 years of experience in construction, commissioning, inspection, calibration and warranty for petroleum, oil and gas specifically in electrical system, instrument system, cathodic protection system, SCADA & telecommunication system, electronic and process instrumentation systems.

    Presently
    (Current-Feb 2009): ABC Electrical & Instrumentation
    Kuala Lumpur
    Position : Electrical & Instrument Supervisor

    Responsibilities include:

    1. Reviewed AFC drawings/specification and contractor’s shop drawings
    2. Reviewed contractor’s E&I purchase inquiry documents.
    3. Reviewed contractor’s technical evaluation of all instrumentation / electrical items.
    4. Material receipt inspection and verification.
    5. Reviewed, advised on and answered site technical query (STQ)s related to E&I raised by contractor’s.
    6. Witnessed vendor’s instrumentation/ electrical test such as calibration and setting adjustment work.
    7. Monitored hook-up and installation of instrument and electrical systems.

    (Feb 2009-Oct 2002): Sarawak Shell Berhad (SSB)
    Position : Electrical & Instrument (E&I) Supervisor

    1. Reviewed AFC drawings/specification and contractor’s shop drawings
    2. Reviewed contractor’s E&I purchase inquiry documents.
    3. Reviewed contractor’s technical evaluation of all instrumentation / electrical items.
    4. Material receipt inspection and verification.
    5. Reviewed, advised on and answered site technical query (STQ)s related to E&I raised by contractor’s.
    6. Witnessed vendor’s instrumentation/ electrical test such as calibration and setting adjustment work.
    7. Monitored hook-up and installation of instrument and electrical systems.
    8. Witnessed factory acceptance test at vendor site as and when required.
    9. Monitored and witnessed contractor’s pre-commissioning work included to function loop tests and performance tests.
    10. Prepared and monitored punchlist items, ensuring they are resolved prior to sail away.
    11. Compiled E&I scope of punchlisting work for offshore hook-up.
    12. Verified the as-built E&I drawing and final documentation.
    13. Identified and verified all the E&I shiploose items and ensure they are properly packed prior to sail away.
    14. Carried out inspection on the fabrication and installation the E&I cable ladder/tray, Instrumentation stand, lighting supports etc. and to complete the visual inspection reports.
    15. Carried out inspection of the termination works at all panels such as MCC, DB, UPS, DCS, and FGS. To ensure the contractor to use the AFC latest revision.
    16. Checked and endorsed the fabrication and installation checks sheet.

    Oct. ’01 – Oct 2002 PETRONAS PENAPISAN TERENGGANU
    SDN. BHD. (PPTSB)
    KERTEH, TERENGGANU.

    1. Monitor and verify electrical works carried out by the contractor and vendor in accordance with the approved project specification, AFC drawing, inspection and test plan, codes and standards. The electrical installation works include cabling, lighting and earthing system.
    2. Involve in electrical system in term of checking, testing start up commissioning and trouble shooting.
    3. To inspect all items related to instrument and electrical within the project scope as per specification requirement.
    4. To conduct test and proper functionality checks on all fire alarm system at all location within the plant.
    5. To carry out preventive maintenance, routine maintenance, corrective measure and inspection of all instrument such as transmitter, micro switches, gauges and level gauges for the refinery plant and LPG bottling plant in Kerteh.
    6. Checking, calibration, inspection and commissioning of all pneumatic equipment at LPG plant.
    7. To inspect, calibration of all new instrument during the plant modification and advancement.

    REFERENCES

    1) Mr XXXXXXX
    Contract / Finance Manager
    Petronas Carigali Sdn. Bhd. (PCSB)

    2) Mr XXXXXXXXX
    Construction Superintendent
    ExxonMobil Exploration and Production Malaysia Incorporated (EMEPMI)
    Kerteh, Terengganu.

    3) Mr XXXXXX
    Fabrication Engineer
    Sarawak Shell Berhad (SSB)

    4) Mr XXXX
    Head of Electrical & Instrumentation
    Petronas Methanol (L) Sdn. Bhd., W.P Labuan.

    5) Mr XXX XXXXXX
    Maintenance Manager
    Petronas Kerteh Refinery
    Kerteh, Terengganu

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s